Faktor-Faktor Yang Mempengaruhi Kecelakaan Kerja Pada Pengrajin Kayu Di Jalan Pahlawan Kecamatan Medan Perjuangan
DOI:
https://doi.org/10.33143/jhtm.v9i1.2780Abstract
Industri kayu merupakan industri untuk memenuhi kebutuhan manusia diantaranya industri daur ulang kayu bekas(kusen, pintu, dan jendela) yang memiliki resiko kecelakaan kerja. Tujuan dilakukan penelitian ini untuk mengetahui Faktor-Faktor Yang Mempengaruhi Kecelakaan Kerja Pada Pengrajin Kayu Jalan Pahawan, Penelitian ini menggunakan desain studi crosssectional dengan jumlah responden 50 dan menggunakan metode kuantitatif. Berdasarkan hasil penelitian, tidak terdapat hubungan terhadap kecelakaan kerja variabel usia  dengan nilai p=0,064 > (α = 0,05), masa kerja nilai  p=.722, pendidikan dengan nilai p=.336. Hasil penelitian menyatakan adanya hubungan antara lingkungan kerja dengan kecelakaan kerja dengan nilai-p 0.018 <0.05 dan prilaku tidak aman memiliki hubungan atau pengaruh terhadap kecelakaan kerja dengan nilai-p 0.018 <0.05. Kondisi tidak aman memiliki hubungan dengan kecelakaan kerja. Tempat kerja yg tidak penuhi standard dan prasyarat kesehatan dan keselamatan kerja bisa menyebabkan penurunan daya produksi dan produktifitas.
Kata Kunci :Prilaku, Kondisi, Kecelakaan Kerja
Â
The wood industry is an industry to meet human needs, including the furniture industry, as well as the used wood recycling industry (frames, doors, and windows) which have the risk of work accidents. The purpose of this study was to determine the factors that influence work accidents on wood craftsmen at Jalan Pahawan. This study used a cross sectional study design with 50 respondents and used a cross sectional study design. Results Based on the research, there is no relationship with work accidents with the age variable p value = 0.064 > (α = 0.05), working period p = .722, education with p = .336. The results of the study stated that there was a relationship between the work environment and work accidents with a p-value of 0.018 <0.05 and behavior had no relationship or influence on work accidents with a p-value of 0.018 <0.05. Unsafe conditions have a relationship with work accidents. Workplaces that do not meet occupational health and safety standards and prerequisites can lead to a decrease in production power and productivity.
Keywords: Behavior, Condition and Work Accident
References
Arsyad, S. A., & Rivai, A. (2019). Perilaku Pengrajin Meubel Dalam Penggunaan Alat Pelindung Diri (APD) Di Kelurahan Manongkoki Kecamatan Polobangkeng Utara Kabupaten Takalar. Jurnal Sulolipu Media Komunikasi Sivitas Akademika Dan Masyarakat, 19(1), 21–27.
Baldissone, G., Comberti, L., Bosca, S., & Murè, S. (2019). The analysis and management of unsafe acts and unsafe conditions. Data collection and analysis. Safety Science, 119(September 2017), 240–251. https://doi.org/10.1016/j.ssci.2018.10.006
BPJS Ketenagakerjaan. (2017). Memperkuat Kapabilitas Dalam Mendukung Perluasan Kepesertaan. In Laporan Tahunan 2017 Annual Report (p. 375).
BPJS Ketenagakerjaan. (2018). Unggul dalam layanan, kuatkan operasional andal. In Laporan Tahunan Terintegrasi 2018 (Issue Laporan Terintegrasi, p. 127).
Budiarti, A., Permatasari, P., Arbitera, C., & Wenny, D. M. (2019). the Relationship of Knowledge, Supervision, and Socialization With Occupational Accidents At Pt. Tatamulia Nusantara Indah. Journal of Industrial Hygiene and Occupational Health, 4(1), 42–57. https://doi.org/10.21111/jihoh.v4i1.3340
Desti, V., Sribudiani, E., & Mardhiansyah, M. (2018). Identifikasi Sumber Bahaya (Hazard) Dalam Penerapan Keselamatan Dan Kesehatan Kerja Di Industri Penggergajian Kayu Berkat Shalawat Kecamatan Tembilahan Kabupaten Indragiri Hilir. Jurnal University of Riau, 5(2 Juli-Desember 2018), 1–9.
Ghuzdewan, T., & Damanik, P. (2019). Analysis of accident in Indonesian construction projects. MATEC Web of Conferences, 258(2019), 02021. https://doi.org/10.1051/matecconf/201925802021
Hasrinal, Darma, I. Y., & Diana, J. R. (2019). Hubungan Unsafe Action Dan Unsafe Condition Dengan Kejadian Kecelakaan Kerja Pada Pekerja Bengkel Mobil. Jurnal Kesehatan Medika Saintika, 10(2), 101–107. https://doi.org/10.30633/jkms.v10i2.415
Health and safety in the manufacturing sector. (2021). Health and Safety Executive. https://www.hse.gov.uk/manufacturing/index.htm
Irkas, A. U. D., Fitri, A. M., Purbasari, A. A. D., & Pristya, T. Y. R. (2020).
Hubungan Unsafe Action dan Unsafe Condition dengan Kecelakaan Kerja pada Pekerja Industri Mebel. Jurnal Kesehatan, 11(3), 363–370. https://doi.org/10.26630/jk.v11i3.2245
Kemenkes RI. (2015). Situasi Kesehatan Kerja. In Infodatin Kemenkes RI (pp. 1– 2).
https://www.kemkes.go.id/download.php?file=download/pusdatin/infodatin/i nfodatin-kesja.pdf
Khanifah, U., Fathoni, A., & Magdalena M, M. (2018). Pengembangan Sumber Daya Manusia Pada Pengerajin Mebel Limbah Kayu Dengan Analisa SWOT (EFAS-IFAS) (Studi kasus: Pengrajin Mebel Limbah Kayu Desa Kangkung, Kec. Mranggen, Kab. Demak ). Journal of Management, 4, 1–22.
Kristiawan, R., & Abdullah, R. (2018). Faktor penyebab terjadinya kecelakaan kerja pada area penambangan batu kapur unit alat berat pt. semen padang. Jurnal Bina Tambang, 5(2), 11–21.
Lestari, R. R. (2017). Faktor-Faktor Peningkatan Terjadinya Kecelakaan Kerja Di Bagian Produksi Di Pt.Johan Kabupaten Kampar Tahun 2016. Jurnal Kesehatan Masyarakat, 1(No 1 April 2017), 70–81.
Martiwi, R., Koesyanto, H., & Pawenang, E. T. (2017). Faktor Penyebab Kecelakaan Kerja Pada Pembangunan Gedung. Higeia Journal Of Public Health Research Anda Development, 1(4), 61–71.
Noor, R., Harianto, F., & Susanti, E. (2014). Karakteristik Kecelakaan Kerja Pada Pelaksanaan Proyek Konstruksi di Surabaya. Proceeding SNTEKPAN, Proceeding, 1–10.
Primadianto, D., Putri, S. K., & Alifen, R. S. (2018). Pengaruh Tindakan Tidak Aman (Unsafe Act) dan Kondisi Tidak Aman (Unsafe Condition) terhadap Kecelakaan Kerja Konstruksi. Jurnal Dimensi Pratama Teknik Sipil, 7(1), 77–84.
Ramadhany, F. A., & Pristya, T. Y. R. (2019). Faktor-Faktor yang Berhubungan dengan Tindakan Tidak Selamat ( Unsafe Act ) pada Pekerja di Bagian Produksi PT Lestari Banten Energi Factors Related to Unsafe Action on Workers in the Production Section of PT Lestari Banten Energi. Jurnal Ilmiah Kesehatan Masyarakat, 11(2), 199–205.
Savitri, M., Gunung, S., & Supriadi, Y. J. (2016). Faktor Manusia Dengan Terjadinya Kecelakaan Kerja Di Sentra Industri Meubel Aluminium Di Kabupaten Hulu Sungai Utara. Jurnal Kesehatan Lingkungan, 13(No 2 Juli 2016), 361–367.
Suhma, F. M., Novi, A. C., & Ma’arufi, I. (2020). Pengaruh Stress Kerja Terhadap Kejadian Kecelakaan Kerja Di Industri Kayu Lapis Bagian Rotary Jember, Indonesia. Journal Website Multidisciplinary Journal, 3(No 1, Juli 2020), 6–10.
Transiska, D. (2015). Pengaruh Lingkungan Kerja Dan Faktor Manusia Terhadap Tingkat Kecelakaan Kerja Karyawan Pada Pt. Putri Midai Bangkinang Kabupaten Kampar. Jurnal Online Mahasiswa Fakultas Ekonomi Universitas Riau, 2(1), 33748.
Tripina, M. (2018). Identifikasi Hazard Lingkungan Kerja Dan Keluhan Kesehatan Di Mebel Surya Cemerlang Tahun 2017 [Universitas Muhhamadiyah Pontianak]. http://repository.unmuhpnk.ac.id/956/1/I-V- VI.pdf
Wirdati, I. E., Denny, H. M., & Kurniawan, B. (2015). Analisis Faktor-Faktor Yang Mempengaruhi Elektrikal Dalam Menerapkan Work Permit Di Pt . X Semarang. Jurnal Kesehatan Masyarakat (e-Journal), 3(3 April), 456–464. http://ejournal-s1.undip.ac.id/index.php/jkm%0AANALISIS
Downloads
Issue
Section
License
I. ORIGINALITY, AUTHORSHIP, AND COPYRIGHT
The manuscripts submitted for publication must be research works written in English that have not been previously published and  are not being considered for publication elsewhere. All the authors must have agreed to the submission and to the order of their names on the title page. They must also have agreed that the corresponding author may act on their behalf throughout the editorial review and publication process. The corresponding author is responsible for obtaining such agreement.
Requests for changes in authorship (order of listing or addition or deletion of names) after submission should be accompanied by signed statements of agreement from all the parties involved. To maintain and protect the publisher‘s ownership and rights and to protect the original authors from misappropriations of their published work, author(s) are required to sign a Journal Publishing Agreement and send it to the editorial office (jhtm@uui.ac.id).
II. PERMISSION
The author is responsible for acquiring the permission(s) to reproduce any copyrighted figures, tables, data, or text that are being used in the submitted paper. Authors should note that text quotations of more than 250 words from a published or copyrighted work will require grant of permission from the original publisher to reprint. The written permission letter(s) must be submitted together with the manuscript.
III. EDITORIAL REVIEW AND REVISION
All papers will be critically read by at least two anonymous reviewers, selected for their competence in the subject area of the paper. Acceptance of the paper will depend upon its scientific merit and suitability for the journal. A paper may be accepted in its original form or subject to revision.
The reviewers' (and editor's) suggestions will be conveyed to the author, who will then have an opportunity to revise the paper. A manuscript returned to an author for revision can be held for a maximum of eight weeks.
The accepted paper will be edited by native English speakers. The cost of language editing service is currently free.
IV. PROOFS
Galley proofs (PDF format) for an accepted article will be sent by e-mail to the corresponding author for copyediting corrections. The core content of an article cannot be changed at this time. It is the author's responsibility to check the entire manuscript, including tables, figure legends, and cited reference numbers, not just the items queried. The proofs should be corrected and mailed to the editorial office within 48 hours of receipt in order to expedite publication. Only one set of corrections will be accepted. In other words, it is important to ensure that all of your corrections are sent to us in one communication.
V. Â REPRINTS
Five free reprint copies of the published article will be shipped to the corresponding authors in Indonesia only, approximately two weeks after the issue is printed. Authors, including overseas authors, who wish to purchase reprints, are required to complete the Reprint Order Form, which will be sent with the galley proofs to corresponding authors. This form must be returned together with the corrected galley proofs.
