LITERATUR REVIEW : PENILAIAN DAMPAK KESEHATAN DAN KESELAMATAN KERJA DALAM OPERASI TAMBANG BAWAH TANAH
DOI:
https://doi.org/10.33143/jhtm.v11i1.5006Abstrak
Operasi tambang bawah tanah memiliki risiko tinggi terhadap kesehatan dan keselamatan kerja (K3). Dampak potensial dapat muncul dari paparan fisik, kimia, serta mekanis yang berbahaya. Kajian ini bertujuan untuk meninjau literatur terkait penilaian dampak kesehatan dan keselamatan kerja pada tambang bawah tanah, dengan fokus pada identifikasi bahaya, penilaian risiko, serta pengendalian yang dilakukan untuk meminimalkan dampak. Berdasarkan hasil tinjauan, diterapkan metode identifikasi risiko seperti HIRARC dan JSA yang efektif dalam menurunkan tingkat risiko, namun masih diperlukan pengembangan lebih lanjut dalam pengawasan dan pelatihan
Referensi
Abituta, M. H., &Yuamita, F. (2024). AnalisisRisiko Kesehatan Dan Keselamatan (K3) Dengan Metode Job Safety Analysis Pada KegiatanPenimbunan (Disposal) PT X. Cosmic Jurnal Teknik, 1(3), 16-24.
Amanzhol, I., Zholmagambetov, N., Abitaev, D., Kusherbayev, S., &Mereke, A. (2023). Assessment And Analysis Of Occupational Risks In Underground Mining Of Polymetallic Ores. GeomateJournal, 25(109), 101-108.
Amini, A., &Susilawati, S. (2023). AnalisisResikoTerkaitKecelakaanKerja Di Tambang Batubara Dan Faktor RisikoTerkait. SEHATMAS: JurnalIlmiah Kesehatan Masyarakat, 2(4), 772-779.
Aprilia, R., Fidayanti, N., &Putrawiyanta, I. P. (2024). AnalisisKeselamatanKerja Pada KegiatanPenambangan Batubara Menggunakan Metode Hiradc Pada PT. Mega Multi Energi Desa SikuiKecamatanTeweh Baru Kabupaten Barito Utara Provinsi Kalimantan Tengah. Innovative: Journal Of Social Science Research, 4(3), 5538-5556.
Arifin, M., Fachsa, T., Mulyadi, A., &Sepriadi, S. (2024). IdentifikasiPotensiBahaya K3 Dan Pengendalian Risiko Pada KegiatanPemboran Di Balai Diklat Tambang Bawah Tanah Sawahlunto Identification Of Potential Ohs Hazards And Risk Control In Drilling Activites In The Sawalunto Underground Mining And Training Ce. JurnalCakrawalaIlmiah, 3(8), 2395-2406.
Aryanto, R., Tuheteru, E. J., Yulia, P. S., & Patian,
S. (2021). Knowledge Sharing of Occupational Health and Safety in Mining at PT. Pilar Artha Sejahtera, Lampung. Journal of Community Based Environmental Engineering and Management, 5(2), 117-124.
Azmy, P. A., &Susilawati, S. (2023). Studi Literatur Review: AnalisisPotensiBahaya K3 Pada Pekerja Tambang Menggunakan Job Safety Analysis (JSA) Pada KegiatanPertambangan. Zahra: Journal Of Health And Medical Research, 3(3), 347-353.
Edmon, R., & Fadhilah, F. (2021). EvaluasiKeselamatan dan Kesehatan Kerja pada Penambangan Batubara PT. Nusa Alam Lestari, Desa Salak, Kecamatan Talawi, Sawahlunto, Sumatera Barat. Journals Mining Engineering: Bina Tambang, 6(2), 63-71.
Fatimah, F., Sayuti, M., &Ritonga, M. F. (2018). IdentifikasiBahaya dan PenilaianResiko pada Pembersihan Heat Exchanger dengan Metode Risk Assessment Di PT. X. Industrial Engineering Journal, 7(2).
Hayati, K. R., Safirin, M. T., Prakosa, A. A. S., &Sholeha, F. (2022). Occupational Health and Safety Analysis of Mining Companies Using Hazard Identification, Risk Assessment, and Risk Control Methods. Nusantara Science and Technology Proceedings, 33-38.
Kelvin, M., Purwoko, B., &Syafrianto, M. K. (2020). AnalisisPotensiBahaya dan PengendalianRisikoPertambangan Batu pada Tahap Muat Angkut dan Dumping di PT. Sulenco Wibawa Perkasa KabupatenMempawahProvinsi Kalimantan Barat. JeLAST: Jurnal PWK, Laut, Sipil, Tambang, 7(1), 1-9.
Mudzakir, A. M., Sukwika, T., & Erislan, E. (2023). Implementation of mining safety management system and impact of drilling operational accident at PT Indodrill Banyuwangi. Jambura Journal of Health Sciences and Research, 5(1), 139-151.
Naeini, S. A. B. & Badri, A. (2024). Identification and categorization of hazards in the mining industry: A systematic review of the literature. International Review of Applied Sciences and Engineering. 15(1), 1-19.
Novaryan, O. Y., Setyaningsih, Y., & Suroto, S. (2021). IntervensiPemaparan Modul Resiko Utama Tambang Bawah Tanah terhadapPeningkatanPengetahuan, Sikap, dan PraktikKontrolKritisResiko Fatal pada Petugas Safety Lapangan. JST (Jurnal Sains Terapan), 7(1), 33-42.
Putri, R. R. (2018). Analisis Potensi Bahaya serta Rekomendasi Perbaikan dengan Metode Hazard and Operability Study (HAZOPS)(Studi Kasus PT. Bukit Asam Tbk). Industrial Engineering Online Journal, 7(2).
Riski, M. S. (2019). AnalisisPenerapanAturan Kesehatan dan KeselamatanKerja (K3) PT. Kaltim Prima Coal Sangatta. JurnalAkuntansiManajemen Madani ISSN, 2580, 2631.
Sinaga, N. E., &Susilawati, S. (2024). Literatur Review: Analisis Faktor- faktorResikoBahaya Pada Pekerja Di Pertambangan. Jurnal Ventilator, 2(2), 45-53.
Sufi, F., Yuliana, L., &Fuadi, Y. (2023). IdentifkasiBahaya, Penilaian, dan PengendalianRisiko Proses Pengangkutan Batu Bara di PT Alam Karya GemilangKabupatenKutaiKartanegaraProv insi Kalimantan Timur. JUMANTIK (JurnalIlmiahPenelitian Kesehatan), 8(2),
-160.
Tanjung, S. Z. (2024). Analisis Pengendalian Risiko Kecelakaan Kerja Pada Pekerja Tambang. Zahra: Journal Of Health And Medical Research, 4(3), 299-304.
Zhou, L. J., Cao, Q. G., Yu, K., Wang, L. L., & Wang, H. B. (2018). Research on occupational safety, health management and risk control technology in coal mines. International journal of environmental research and public health, 15(5), 868.
International Labour Organization (ILO). (2023). Global Employment Trends for Mining Industry Report. Geneva: ILO.
World Health Organization (WHO). (2022). Silicosis and Occupational Lung Diseases: Global Report on Mining Industry. Geneva: WHO
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
I. ORIGINALITY, AUTHORSHIP, AND COPYRIGHT
The manuscripts submitted for publication must be research works written in English that have not been previously published and  are not being considered for publication elsewhere. All the authors must have agreed to the submission and to the order of their names on the title page. They must also have agreed that the corresponding author may act on their behalf throughout the editorial review and publication process. The corresponding author is responsible for obtaining such agreement.
Requests for changes in authorship (order of listing or addition or deletion of names) after submission should be accompanied by signed statements of agreement from all the parties involved. To maintain and protect the publisher‘s ownership and rights and to protect the original authors from misappropriations of their published work, author(s) are required to sign a Journal Publishing Agreement and send it to the editorial office (jhtm@uui.ac.id).
II. PERMISSION
The author is responsible for acquiring the permission(s) to reproduce any copyrighted figures, tables, data, or text that are being used in the submitted paper. Authors should note that text quotations of more than 250 words from a published or copyrighted work will require grant of permission from the original publisher to reprint. The written permission letter(s) must be submitted together with the manuscript.
III. EDITORIAL REVIEW AND REVISION
All papers will be critically read by at least two anonymous reviewers, selected for their competence in the subject area of the paper. Acceptance of the paper will depend upon its scientific merit and suitability for the journal. A paper may be accepted in its original form or subject to revision.
The reviewers' (and editor's) suggestions will be conveyed to the author, who will then have an opportunity to revise the paper. A manuscript returned to an author for revision can be held for a maximum of eight weeks.
The accepted paper will be edited by native English speakers. The cost of language editing service is currently free.
IV. PROOFS
Galley proofs (PDF format) for an accepted article will be sent by e-mail to the corresponding author for copyediting corrections. The core content of an article cannot be changed at this time. It is the author's responsibility to check the entire manuscript, including tables, figure legends, and cited reference numbers, not just the items queried. The proofs should be corrected and mailed to the editorial office within 48 hours of receipt in order to expedite publication. Only one set of corrections will be accepted. In other words, it is important to ensure that all of your corrections are sent to us in one communication.
V. Â REPRINTS
Five free reprint copies of the published article will be shipped to the corresponding authors in Indonesia only, approximately two weeks after the issue is printed. Authors, including overseas authors, who wish to purchase reprints, are required to complete the Reprint Order Form, which will be sent with the galley proofs to corresponding authors. This form must be returned together with the corrected galley proofs.
