PERANCANGAN TIMBANGAN KOMODITI PERTANIAN BERBASIS MIKROKONTROLER ATMEGA 16 DENGAN TAMPILAN PC DAN OUTPUT SUARA

Penulis

  • Siti Amra
  • Arif Indra Mulia
  • Desita Ria Yusian TB

DOI:

https://doi.org/10.33143/jics.Vol8.Iss2.2597

Abstrak

Abstrak—Timbangan itu sendiri adalah sebuah alat bantu yang digunakan untuk mengetahui berat Dalam hal pengukuran massa, pengukuran massa biasanya dilakukan secara manual yaitu dengan menggunakan suatu benda. Dalam pemanfaatannya timbangan digunakan diberbagai bidang salah satunya dibidang perdagangan, seperti halnya pedagang buah dipasar yang kebanyakan masih menggunakan timbangan manual. Dengan demikian dirancanglah suatu alat timbangan elektronik menggunakan mikrokontroler Atmega16 sebagai pengendali. Alat di rancang unuk menimbang berat benda secara otomatis. Dengan menggunakan satu buah sensor yaitu load cell. Sensor di letakkan di tengah agar alat dapat me nimbang secara baik. untuk mendeteksi adanya beban sensor akan bekerja secara otomatis. sensor akan membaca dan mengirimkan sinyal ke mikrokontroler yang kemudian berat benda tersebut ditampilkan darri beban akan di tampilkan LCD LCD. Nilai yang di tampilkan hasil pengeluaran berat benda, hasil pengeluaran berat benda, dan keluaran suara pada tampilan PC dalam bentuk berat dan harga suatu benda. Pada alat ukur berat benda timbangan terdapat hasil error yang disebabkan karena kelebihan berat pada beban maksimum 150 kg sehingga mendapat hasil yang di kategorikan error.

Kata kunci : Timbangan , Sensor, Mikrokontroler, LCD, Dan Output suara.

Abstrak The scale itself is a tool that is used to determine weight. In terms of mass measurement, mass measurement is usually done manually by using an object. In its utilization, scales are used in various fields, one of which is in the field of trade, as well as fruit traders in the market, most of whom still use manual scales. Thus, an electronic weighing device was designed using the Atmega16 microcontroller as a controller. The tool is designed to weigh objects automatically. By using one sensor, namely the load cell. The sensor is placed in the center so that the tool can weigh properly. to detect a load the sensor will work automatically. the sensor will read and send a signal to the microcontroller which then the weight of the object is displayed from the load will be displayed on the LCD LCD. The value displayed is the result of the expenditure of the weight of the object, the result of the expenditure of the weight of the object, and the sound output on the PC display in the form of the weight and price of an object. On the weighing instrument, there is an error result caused by being overweight at a maximum load of 150 kg so that it gets results that are categorized as errors.

Keywords: Scales, Sensors, Microcontroller, LCD, And Sound Output.

Referensi

Blocher,Richard,2004.â€Dasar lektronikaâ€.Andi.Jogyakarta.

Diposkan oleh Agung Winardi (diakses 2012)

Fadli, 2013, Pembuatan Alat Ukur Tinggi Dan Berat Badan Ideal Berbasis Mikrokontroler Dengan output Suara, Politeknik Negeri Lhokseumawe.

http://fahmizaleeits,wordpres.com ( diakses tanggal 12 Maret 2012)

Malvino, P.A., 1995, Prinsip - prinsip Elektronika, Penerbit Erlangga, Jakarta.

Malvino,1994, Aproksimasi Rangkaian Elektronika, Erlangga.Jakarta.

Widodo Budiharto. Panduan Praktikum Mikrokontroler AVR Atmega16. Jakarta: Elex Media Komputindo, 2008.

Wasito S, 2004, Vademekum elektronika edisi kedua, PT.Gramedia Pusaka Utama, Jakarta

Zulfahmi, 2008, Pembuatan Alat Pengukur Tinggi dan Berat Badan Dengan Output Suara, Politeknik Negeri.

Arif Indra Maulana 2014 Rancang Bangun Timbangan Komoditi Pertanian Berbasis Mikrokontroler Atmega 16 Dengan Tampilan Pc Dan Output Suara

Unduhan

Terbitan

Vol 8 No 2 (2022): OKTOBER 2022

Bagian

Articles

Lisensi

COPYRIGHT TRANSFER FORM

The copyright to this article is transferred to Universitas Ubudiyah Indonesia (UUI) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UUI. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.

We declare that:

  1. This paper has not been published in the same form elsewhere.
  2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
  3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.

Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UUI. The copyright transfer covers the right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature. The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.

Retained Rights/Terms and Conditions

  1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the work.
  2. Authors may reproduce or authorize others to reproduce the work or derivative works for the author’s personal use or for company use, provided that the source and the UUI copyright notice are indicated, the copies are not used in any way that implies UUI endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
  3. Although authors are permitted to re-use all or portions of the work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.