SISTEM PENDUKUNG KEPUTUSAN PENENTUAN KELAYAKAN HEWAN QURBAN MENGGUNAKAN TECHNIQUE FOR OTHERS REFERENCE BY SIMILARITY TO IDEAL SOLUTION (TOPSIS) STUDI KASUS KUTARAJA AQIQAH RUMPET

Penulis

  • Zuhar Musliyana
  • Isnaini Ladesma
  • Ayu Helinda
  • Mahendar Dwi Payana

DOI:

https://doi.org/10.33143/jics.Vol8.Iss2.2672

Abstrak

Abstrak— Berdasarkan data yang diperoleh Dinas Pangan Pertanian Kelautan dan Perikanan (DPPKP) pada tahun 2020 terdapat sebanyak 3.016 ekor hewan qurban yang disembelih di kota Banda Aceh terdiri dari 1.620 ekor sapi dan 1.394 ekor kambing. Tingginya minat masyarakat dalam berqurban mengharusnkan pihak penyedia hewan kurban dan pelaku qurban untuk dapat melakukan pengecekan kelayakan hewan qurban dengan mudah dan cepat. Hal ini diperlukan agar hewan yang akan diqurbankan memunuhi syarat hewan qurban sesuai aturan syariat islam. Berdasarkan permasalahan tersebut penelitian ini mengusulkan perancangan sistem pendukung keputusan menggunakan metode technique for orthers reference by similarity to ideal solution (TOPSIS). Penelitian ini dilakukan pada kuta raja aqiqah rumpet yang merupakan salah satu tempat penyedia hewan qurban dibanda aceh. Penelitian ini menggunakan 4 (empat) parameter/kriteria hewan qurban yaitu usia, berat, kondisi hewan, jenis kelamin. Hasil penelitian menunjukkan nilai tertinggi untuk pengecekan kelayakan hewan qurban yaitu 0191898 dan nilai terendah/tidak layak 0,109089. Sistem yang diusulkan dapat digunakan untuk melakukan pengecekaan kelayakan hewan qurban dengan akurasi yang tepat dan efektir serta dengan waktu yang singkat.

Kata kunci: sistem pendukung keputusan, topsis, hewan qurban

Abstract— Based on data obtained by the Marine and Fishery Agriculture Food Service (DPPKP) in 2020 there were 3,016 sacrificial animals slaughtered in Banda Aceh city consisting of 1,620 cows and 1,394 goats. The high public interest in sacrificing requires the providers of sacrificial animals and those performing the qurbani to be able to check the eligibility of the sacrificial animals easily and quickly. This is necessary so that the animal to be sacrificed fulfills the requirements for a sacrificial animal according to the rules of Islamic law. Based on these problems, this study proposes the design of a decision support system using the technique for other reference by similarity to ideal solution (TOPSIS) method. This research was conducted at Kuta Raja Aqiqah Rumpet which is one of the places that provide sacrificial animals in Banda Aceh. This study used 4 (four) parameters/criteria for sacrificial animals, namely age, weight, animal condition, sex. The results showed that the highest value for checking the feasibility of sacrificial animals was 0191898 and the lowest/unfit value was 0.109089. The proposed system can be used to check the feasibility of sacrificial animals with precise and effective accuracy and in a short time.

Keyword: Decision support system, topsis, sacrificial animals

Referensi

MUI, “Hukum dan panduan pelaksanaan ibadah kurban saat kondisi wabah penyakit mulut dan kuku,†2022. [Online]. Available: https://ditjenpkh.pertanian.go.id/uploads/download/download-1658454142.pdf.

Damkar, “Banda Aceh Sembeli 3.016 Hewan Kurban pada Idul Adha 1441 H,†2020. https://damkar.bandaacehkota.go.id/2020/08/05/banda-aceh-sembeli-3-016-hewan-kurban-pada-idul-adha-1441-h/.

lazalbunyan, “Pengertian, Hukum dan Keistimewaan Qurban,†2019. https://www.lazalbunyan.org/pengertian-hukum-dan-keistimewaan-qurban/.

MUI, “Syariat dan Syarat Hewan Kurban,†2022. https://mui.or.id/mui-provinsi/mui-sulsel/35769/syariat-dan-syarat-hewan-kurban/.

Jayusman, “Tinjauan Hukum Islam Terhadap Ibadah Kurban Kolektif,†Al-’Adalah, vol. x, p. 435, 2012.

A. Muharsyah, S. R. Hayati, M. I. Setiawan, H. Nurdiyanto, and Yuhandri, “Sistem Pendukung Keputusan Penerimaan Jurnalis Menerapkan MultiObjective Optimization On The Basis Of Ratio Analysis (MOORA),†J. Ris. Komput., 2018, doi: 10.30645/j-sakti.v2i2.79.

J. Nurjaman, H. Rosyid, and P. A. R. Devi, “SISTEM PENDUKUNG KEPUTUSAN DENGAN METODE TOPSIS UNTUK PENYELEKSIAN PENERIMAAN SISWA BARU,†Indexia, vol. 3, no. 2, 2021, doi: 10.30587/indexia.v3i2.3295.

D. W. Trise Putra, S. N. Santi, G. Y. Swara, and E. Yulianti, “METODE TOPSIS DALAM SISTEM PENDUKUNG KEPUTUSAN PEMILIHAN OBJEK WISATA,†J. Teknoif Tek. Inform. Inst. Teknol. Padang, vol. 8, no. 1, 2020, doi: 10.21063/jtif.2020.v8.1.1-6.

Unduhan

Terbitan

Vol 8 No 2 (2022): OKTOBER 2022

Bagian

Articles

Lisensi

COPYRIGHT TRANSFER FORM

The copyright to this article is transferred to Universitas Ubudiyah Indonesia (UUI) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UUI. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.

We declare that:

  1. This paper has not been published in the same form elsewhere.
  2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
  3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.

Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UUI. The copyright transfer covers the right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature. The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.

Retained Rights/Terms and Conditions

  1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the work.
  2. Authors may reproduce or authorize others to reproduce the work or derivative works for the author’s personal use or for company use, provided that the source and the UUI copyright notice are indicated, the copies are not used in any way that implies UUI endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
  3. Although authors are permitted to re-use all or portions of the work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.